Talk to the Chamber Se habla español
Verified by the chamber

BAT Gundrilling Svc

Santa Clara, Santa Clara County

Deep, straight holes in metal and plastic, drilled to your drawing in Santa Clara.

Miscellaneous ServicesMachine shopManufacturerVerified

About

BAT Gundrilling Svc runs a precision deep-hole drilling shop at 2730 Scott Boulevard in Santa Clara, in the industrial blocks between the Caltrain line and Central Expressway, with a second facility a short drive away on De La Cruz Boulevard. Max Gomez is the owner. The shop is small, in the range of two to ten people, and its customers are the industrial and semiconductor-equipment makers that fill this part of Santa Clara County.

Deep-hole drilling, explained

Gundrilling is a machining process for holes that are far deeper than they are wide: cooling passages, hydraulic and air lines, and weight-reducing bores in blocks, shafts and plates. A conventional drill wanders after a few diameters of depth; a gundrill, fed with high-pressure coolant through the tool, keeps the hole straight and the surface finish clean over lengths a general machine shop cannot reach.

BAT Gundrilling describes itself as a job shop, which means it works to the customer's drawing rather than making a product of its own. Parts arrive from other machine shops and from equipment builders, get their deep holes drilled, and go back for the rest of the machining.

Sending a job to the shop

Bring a drawing or a model that calls out hole diameter, depth, straightness and position tolerance, and say what the material is: ferrous metals, non-ferrous metals and plastics behave differently under the tool. Ask for a lead time at quoting, since a job shop schedules around what is already on the machines, and ask whether the part can be drilled from one side or must be flipped. If the part comes from another shop, agree who owns the datum surfaces before it ships.

Where the parts come from

Most work comes from Santa Clara, San Jose, Sunnyvale, Cupertino, Milpitas, Campbell, Mountain View and Los Altos, the manufacturing belt of Santa Clara County. Both sites sit north of downtown Santa Clara near the Highway 101 and San Tomas corridors, convenient for a courier run.

Reach the shop at 408-727-1220 to discuss a part.

Services

Typical for this type of business
Gundrilling of deep holes

Single-flute gundrilling of long, straight, small-diameter holes in blocks, shafts, manifolds and plates, where an ordinary twist drill would wander off centre or leave a rough bore.

Drilling in ferrous and non-ferrous metals

Deep holes in steel, stainless, aluminium, brass and copper alloys, with tooling and coolant pressure adjusted to the material so the hole stays true over its full depth.

Deep holes in plastics

Gundrilling of engineering plastics such as acetal, nylon and PEEK for manifolds and fixtures, taking care with heat build-up so the bore keeps its size and finish.

Job-shop work to customer drawings

Drilling to the tolerances, positions and depths called out on a customer's print or model, on parts supplied by other machine shops or by equipment builders in Santa Clara County.

Second Santa Clara facility

Additional machine capacity at a nearby De La Cruz Boulevard site, useful when a job needs a second setup or a customer wants a shorter turnaround on a batch.

Details

Established
1984
From public records

Location and service area

Map
2730 Scott Blvd
Santa Clara, CA 95050-2511
Get directions →
Area served
Santa ClaraSan JoseSunnyvaleCupertinoMilpitasCampbellMountain ViewLos AltosSanta Clara County

Common questions

Typical for this type of business
What is gundrilling and when do I need it?

Gundrilling makes holes whose depth is many times their diameter, typically past the point where a standard drill drifts. If a drawing calls for a long coolant passage, hydraulic line or lightening hole with a straightness or finish requirement, a gundrilling shop is the usual route.

What should I send with a request for quote?

A drawing or model with hole diameter, depth, position and straightness tolerance, the material and its condition, the quantity and the date needed. Most shops also want to know whether the part arrives rough or finished, since that decides how it can be fixtured.

Can the shop drill from both sides to reach a long hole?

Often, but it depends on the part and the tolerance. Ask whether the shop can hold alignment when a hole is drilled from two ends, and whether a single long pass is possible on its machines instead.

How long does a gundrilling job usually take?

It depends on what is already running. A job shop schedules around current work, so ask for a quoted lead time and confirm it again when the parts ship to the shop, especially for a batch.

Before you hire

  • Send a drawing that states hole diameter, depth, position and straightness tolerance.
  • State the material and whether the part arrives rough-machined or finished.
  • Ask for a written quote with lead time and how the parts will be inspected.
  • Confirm who owns the datum surfaces if the part is coming from another shop.
  • Ask whether the hole is drilled from one side or two and what that means for alignment.
Español

Resumen en español

En Santa Clara, sobre Scott Boulevard, BAT Gundrilling Svc se dedica al taladrado profundo de precisión: orificios largos y rectos en metales ferrosos, no ferrosos y plásticos, hechos según el plano del cliente. Es un taller pequeño que trabaja para fabricantes de equipos industriales y de semiconductores del condado de Santa Clara, con una segunda planta en De La Cruz Boulevard. Antes de enviar una pieza conviene indicar el material, las tolerancias y la fecha de entrega. El propietario es Max Gomez y el teléfono es 408-727-1220.

How this listing was compiled

Details marked Verified were checked on September 29, 2026 against linkedin.com. Other details come from public business records or describe what is typical for this type of business, as marked. Not yet confirmed by the business.

Own this business? Confirm or correct this listing →
SFBAYHCC
Join the Bay Area’s business network.
Next event: Speed networking in Contra Costa County